How Can I Connect Synology NAS Using iSCSI and Mapped Drives?

Would you like to know, “How do the Synology iSCSI setup Windows 10?”. Here a guide is given in-depth for it, let’s know from here.

The Synology Network Attached Storage (NAS) is overwhelmingly a great wireless device. You can use the wireless storage device especially to store a lot of data and access it anywhere just remotely. Apart from this, the Synology NAS ordinary provides a networked location to keep storing your exponentially boosting and secure data, whether at home or for your company. A Synology Network Attached Storage system moves beyond that, allowing you to build a confidential cloud to store, access, back up, and transfer all your files securely and freely.

You can connect the Synology wireless NAS without using the switch or router. If you would like to connect it directly then you can use the iSCSI & Mapped drives. This is the way to connect the Synology Network storage device without an internet connection.

In its most straightforward formation, the Synology data scrubbing function will review each “copy” of the data. In case, it is not corresponding to the checksum stored, it will update the Synology NAS data. This procedure is mainly maneuvering to make sure that data that has not been read in a while is not debasing and if it is, will easily troubleshoot it.

ISCSI, the meaning of this abbreviation is Internet Small Computer System Interface. It performs all the activities on top of the Transport Control Protocol (TCP). This permits the SCSI command to be transmitted end-to-end over wide-area networks (WANs), local-area networks (LANs), or the internet connection.

What Is Internet Small Computer Systems Interface (iSCSI)?

The iSCSI is an abbreviation of an Internet Small Computer Systems Interface. It is an Internet Protocol-based storage networking ideal for connecting data storage structures. iSCSI gives block-level access to storage devices by taking SCSI (Small Computer Systems Interface) commands over a TCP (Transport Control Protocol) or IP (Internet Protocol) network.

iSCSI (Internet Small Computer Systems Interface) encourages data transfers over intranets and operates storage over high distances. It can be used to share a lot of data over local area networks (LANs), the Internet, or wide area networks (WANs). You can also use it to boost location-independent data storage and recovery.

An Internet Small Computer Systems Interface (iSCSI) address is included in the location of an iSCSI initiator. It is generally targeted on the wireless network and the Internet Small Computer Systems Interface name. The location is a mixture of the IP address or hostname and the TCP (Transport Control Protocol) port number. For Internet Small Computer Systems Interface initiators, the Transport Control Protocol port number is forgotten from the address.

Apart from this, the iSCSI is a prevalent performance of storage area network systems, while Network Attached Storage is a standard method for hooking up storage devices to the user network.

What are Mapped Drives?

A mapped drive or network drive is overwhelmingly a drive, Network Attached Storage, or communicates on another wireless-enabled computer or server on the same network. It may be a local area network. For instance, when utilizing a corporate network connection, you may have access to corporation or buyer info on a network drive.

Mapped drives allow a lot of users to efficiently and quickly navigate over an impeccable network connection. Through the mapped drives, you can merely point and click to access network resources, whether you are operating in Windows Explorer, software application dialogue boxes, My Computer, etc. such as Open or Save.

How Can I Connect Synology NAS Using iSCSI & Mapped Drives?

These are the following checkpoints which are given below to connect the Synology NAS without a switch or router Using iSCSI & Mapped Drives

1. Initiating SAN Manager

In the beginning, launch on your desktop a SAN Manager app. It is helpful to manage and create iSCSI targets or LUNs on your Synology Network Attached Storage system. Launch the SAN Manager app and move to the application menu. After this, clicking on the ok option to keep the SAN Manager app should be prepared to use.

2. Creating an iSCSI Target

Launch the SAN Manager app to create an Internet Small Computer Systems Interface. Find the iSCSI section to add it. Set the Name1 and IQN2 ( iSCSI Qualified Name) to check the Enable CHAP checkbox. After this, enter in a username field your Email and password that you would like to use for establishing the iSCSI target while hooking up from an iSCSI client. Now, you have to choose the Map of an existing LUN and choose the Map later to map a LUN to this iSCSI target later. Follow the on-screen given instructions to go ahead.

3. Creating a LUN

Now, you have to launch the SAN Manager app and create the LUN. find on the homepage of the SAN Manager app, LUN and click on it. Follow the on-screen given instructions to create a LUN. Also, set the LUN properties.

4. Finding the IP Address or find.synology of Synology NAS

If you would like to access the iSCSI target, kindly locate it on the web browser find.synology and IP address of your wireless Synology network attached storage device.

5. Mounting the iSCSI Target on Windows

To mount an Internet Small Computer Systems Interface target on Windows, search for the iSCSI (Internet Small Computer Systems Interface) Initiator app from the Start Menu and launch it. Follow the on-screen given instructions to Mounting the iSCSI Target on Windows.

6. Mounting the iSCSI Target on Ubuntu

Lastly, you need to Mount the iSCSI Target on Ubuntu. Follow the given instructions on the screen to mount the Internet Small Computer Systems Interface target on Ubuntu.

So, these are the following steps to connect the Synology Network Attached storage system without any switch and router.

Related Post